UST Tank Search for Buyers

UST Tank Search for Buyers – Common Questions

As a Buyer, searching for an underground storage tank has become integrated as part of the inspection period. These are some of the most common questions that we are asked regarding the tank inspection process and why it is important to protect yourself before you buy.

What is an underground storage tank (UST)?

Homes, apartments, farms and some businesses that are currently or were previously heated using diesel heating oil, used an underground storage tank (UST) to store the heating oil. The USTs were usually buried in the yard, and copper tubing or steel piping was installed to deliver the diesel from the tank to the furnace. In Oregon, an estimated 100,000 USTs were installed for home heating.

UST Tank Search for Buyers

UST Tank Search for Buyers – Rendition of an underground storage tank (UST) buried in a yard, with the supply lines running into the home.

Why should I worry about a UST?

Underground storage tanks are made of steel, which are selected for their strength, not for their corrosion resistance. Therefore steel USTs rust through, given enough time. Like a roof, steel storage tanks have a life of about 25 years, and like a roof it is cheaper to replace the tank or convert to another heat source before it leaks and the damage is done.

UST Tank Search for Buyers

UST Tank Search for Buyers – Removed tank with numerous holes, this allows the diesel fuel to leak into the surrounding soil.

Performing the UST tank search

How do you find an abandoned UST?

The best way to determine if there is an abandoned oil tank on the property, is to conduct a tank search.

How do you perform a tank search?

EcoTech first will perform a Tank Background Search, this entails a detailed examination of state and local databases, as applicable. Besides years of on-the-job experience, our technician conducts a visual inspection for product lines and fill or vent pipes, utilizes metal detectors and Terra, our specially trained Petroleum Detection K-9.

UST Tank Search for Buyers

UST Tank Search for Buyers – Terra finds a tank

UST Tank Search for Buyers

UST Tank Search for Buyers – The UST Terra found during the tank search, is now marked out for sampling.

What if there is an in-service tank already on the property, should I still do a tank search?

EcoTech highly recommends doing a tank search to rule out any additional tanks that may or may not be on the property. On average our tank searches cost $99.00, during the inspection period this is money well invested. Not only does a tank search give you peace of mind that there are no additional tanks on the property. It can also save you from years of worry or money spent if there is indeed an additional leaking tank on the property, which you now own and are responsible for cleaning up.

 

UST Tank Search for Sellers

UST Tank Search for Sellers – Common Questions

As a homeowner, you may be thinking about or are preparing to put your home up for sale. For some homeowners, you may want to perform a tank search to prepare yourself for any unforeseen surprises during the home inspection period. On the other hand, you may know that there is a tank on your property that was decommissioned and never registered with the DEQ or that there is an abandoned oil tank, but you don’t know where. These are some of the most common questions that we are asked regarding the tank inspection process and important information you should know before you sell.

What is an underground storage tank (UST)?

Homes, apartments, farms and some businesses that are currently or were previously heated using diesel heating oil, used an underground storage tank (UST) to store the heating oil. The USTs were usually buried in the yard, and copper tubing or steel piping was installed to deliver the diesel from the tank to the furnace. In Oregon, an estimated 100,000 USTs were installed for home heating.

UST Tank Search for Sellers

UST Tank Search for Sellers – Rendition of an underground storage tank (UST) buried in a yard, with the supply lines running into the home.

Why should I worry about an UST?

Underground storage tanks are made of steel, which are selected for their strength, not for their corrosion resistance. Therefore steel USTs rust through, given enough time. Like a roof, steel storage tanks have a life of about 25 years, and like a roof it is cheaper to replace the tank or convert to another heat source before it leaks and the damage is done.

UST Tank Search for Sellers

UST Tank Search for Sellers – Shot from interior of tank, many small holes in the UST, which will cause diesel fuel to leak into the surrounding soil.

Performing the UST tank search

How do you find an abandoned UST?

The best way to determine if there is an abandoned oil tank on the property, is to conduct a tank search. As the homeowner, you may also look for these tell-tale signs of an abandoned oil tank:

  • An Oil Fill Pipe, these are usually close to the ground and near where the furnace is located in your home.  The lid itself will usually indicate OIL in the center of the cap.
UST Tank Search for Sellers

UST Tank Search for Sellers – Fill pipes can appear in multiple places within a property, in a walkway, grass, driveway, and even under a deck are a few examples.

  • A Vent Pipe, this is usually attached to the home, about two to eight feet up the side of the house and it is 1.25 to 1.5 inches in diameter with a small vent cap on it.

 

UST Tank Search for Sellers

UST Tank Search for Sellers – 4 different types of vents and their locations.  Fill vents can come in different sizes, colors, and may be placed at varying sections of the home.

  • Product lines, may be found sticking out of the ground in the yard, in a crawlspace or basement floor.  Product lines may still be attached to a basement or crawlspace wall next to water or gas pipes.
UST Tank Search for Sellers

UST Tank Search for Sellers – Crimped product lines may appear as random pipes sticking out of a basement floor or out of the dirt near the home in the yard. A product line may also appear running up a wall in a basement or crawlspace, like the far right picture (the thin line on the right)

  • Patching, will be present on a basement floor, it appears as though a pipe has been removed and covered with concrete.  The patching may appear as a bad “patch job” with numerous bumps and grooves.
UST Tank Search for Sellers

UST Tank Search for Sellers – Patching on a basement floor.

How do you perform a tank search?

EcoTech first will perform a Tank Background Search, this entails a detailed examination of state and local databases, as applicable. Besides years of on-the-job experience, our technician conducts a visual inspection for product lines and fill or vent pipes, utilizes metal detectors and Terra, our specially trained Petroleum Detection K-9.

UST Tank Search for Sellers

UST Tank Search for Sellers – Terra finds a tank within a planter.

UST Tank Search for Sellers

UST Tank Search for Sellers – The tank that Terra found is marked out. The purple arrow indicates where the vent pipe has been removed from the siding. The red arrows indicate the length of the tank, marked with orange flags as well as the tip of the measuring tape.

 

UST Soil Sampling

UST Soil Sampling Common Questions

Whether a tank search has resulted in a UST being discovered or if there is an in-service tank on the property, EcoTech highly recommends soil sampling be completed around the tank.

If you are a buyer, it is imperative for you to obtain soil samples on the underground storage tank, as once you purchase the property, you have now purchased the UST and if it is leaking, are now responsible for the clean-up.

If you are a seller or a homeowner thinking about selling, and you know you have an UST on your property, preemptive soil samples will allow you prepare for pre-inspection complications.

For more information on underground storage tanks and real estate transactions, please see the DEQ Buying or Selling guide for helpful tips DEQs Buying or Selling a Home with a UST

What if a UST is found?

Soil Samples are recommended. Per Oregon DEQ, the best way to determine if a UST has leaked, is to have soil samples collected from under each end of the tank and have the samples analyzed for diesel and heavy oil. Each sample should be analyzed at an independent laboratory that is DEQ certified.

UST Soil Sampling

UST Soil Sampling – Rendition of technician taking soil samples 12-24″ beneath an underground storage tank.

UST Soil Sampling

UST Soil Sampling – Sampling tubes filled with soil from around an underground storage tank. The soil is then placed in a jar and sent to the lab for testing.

There is an in-service tank, should I perform soil samples?

As a prospective buyer, it is essential to test a tank before purchasing the property to determine if it has leaked or is currently leaking. The current property owner is responsible for any necessary contamination clean-up from a leaking underground storage tank. Purchasing a property without testing a tank makes you, as the new property owner, liable for a prior or currently leaking UST.

I’m selling my home and the buyer has found a tank, what are the next steps for me?

EcoTech recommends that you decommission the tank and register it with DEQ. Although, through our experience, buyers and their agents will require at a minimum proof of clean soil samples.

Types of Soil Samples

What are the type of UST soil samples? 

There are three different categories that sample results can be placed into:

Non-Detect (ND)

In-service tank: samples that were analyzed have come back as non-detect and no further tests are necessary. EcoTech does recommend that the decades old tank be decommissioned and a new heat source chosen, as soon as it is practical, before the tank does leak.

Out-of-service tanks: samples that were analyzed have come back as non-detect and no further tests are necessary. EcoTech does recommend that the out-of-service tank be decommissioned within 90 days of the soil samples and registered with DEQ.

*For both the in-service and out-of-service non-detect samples that were taken from each end of the UST, does not rule out the possibility of contamination underneath the soils of the tank, that is why EcoTech recommends decommissioning of the UST.*

50 PPM (parts per million) or less

In-service tank: samples that were analyzed indicate that a leak is present. Although this is a low detection and it is not reportable to DEQ, it indicates a leak has started and should be a concern. EcoTech highly recommends that the tank be taken out-of-service and decommissioned and registered with the DEQ.

Out-of-service tank: samples that were analyzed indicate that a leak is present. Although this is a low detection and it is not reportable to DEQ, it indicates a leak has started and should be a concern. EcoTech recommends that the out-of-service tank be decommissioned and registered with DEQ.

50.1 PPM or Greater

In-service or out-of-service tanks: “The OR DEQ requires that any site where a soil sample analysis shows petroleum concentrations of 50 PPM or greater, must be reported to the DEQ within 72 hours. Remediation will be determined based on the extent of the contamination.” Simply put, the tank is leaking above the reporting limit, EcoTech is required to report the leak to the DEQ, corrective action is now needed to clean-up the site.

Underground Storage Tank or UST Decommissioning

Underground Storage Tank or UST Decommissioning Common Questions

 

What does it mean to decommission a UST?

The most generic term, is to take the tank out of service.  Underground Storage Tank or UST decommissioning is accomplished by ensuring the tank has been properly cleaned and removed or completely filled with an inert material. The inert material consists either of perlite, a sand-like material or slurry, concrete.

If the tank is to be registered with DEQ, two soil samples will be taken from inside the bottom of the tank, after being pumped and cleaned, and analyzed for diesel and heavy oil. Each sample needs to be analyzed at an independent laboratory that is DEQ certified.

If the samples come back as non-detected, the tank can be then registered with the DEQ.

If the samples come back above the DEQ reporting limit (50.1 PPM), remediation will need to take place and once the corrective action has been completed, the tank will be registered with DEQ.  If soil remediation is need, please see our Decommissioning via Heating Oil Contaminated Soil Clean-Up page.

Why should homeowners decommission their UST and register it with the DEQ

I’ve emptied my tank of oil years ago and don’t use it any more, doesn’t that mean it is decommissioned?

No, in order to decommission the tank you will need to take the tank permanently out of service. This is completed by either removing the tank or filling it in place with an inert material.

Can I decommission my own UST?

According to the DEQ, it is legal for a homeowner to decommission their own UST, assuming that you perform the work yourself and comply with all applicable local, state and federal rules. Before deciding to decommission your own tank, the DEQ highly recommends that you read the DEQ Cleanup Guidance for Homeowners to understand the full scope of work involved in completing a decommissioning project. DEQ Decommissioning Guide for Homeowners

I’m selling my home and have switched over to gas years ago, should I decommission my tank?

It is not a requirement to decommission your tank before selling your home. Unfortunately in this highly active real estate market, many buyers will require at a minimum, proof of recent clean soil samples. Additionally, you will need to provide the buyer with documentation that the tank has been pumped of all of its contents. The documentation that the DEQ requires is dated receipts from the company that pumped the oil out of the tank; or receipts from the oil recycling company, if you pumped the tank yourself.

Do I have to decommission my UST?

No, it is not a requirement to decommission your tank once you stop using it.  However, if you are thinking about selling your home, most buyers and their agents request decommissioning and registration before closing. Per DEQ, you will need to ensure that the tank has been emptied of oil and you will need to provide that documentation to the new buyer.  DEQ Requirements for Tanks No Longer in Use

Do I have to register my UST?

It is not required by DEQ to register the tank, but it is highly recommended. However, if you are decommissioning the tank as part of the sale of the home, this is usually a prerequisite prior to closing.

Why should I register my UST?

There are three primary benefits of registering the UST decommissioning with the DEQ:

  1. The decommissioning becomes public record.  So, even if your copy of the paperwork is misplaced or the name of the contractor that performed the work is forgotten, the record remains in the DEQ files.
  2. When the DEQ changes any of their rules (i.e. reporting limits, remediation guidelines, etc.), previously closed or registered tanks are “grandfathered” in.  Tanks that were decommissioned and not registered are subject to the new rules.  For example, over time the DEQ required the locations of soil sampling to change.  Meaning a previously unregistered decommissioned tank, would need to obtain additional soil samples to bring the tank up to the new DEQ sampling requirements.
  3. Most buyers are requiring DEQ registration because they don’t want to deal with future DEQ rule changes.  Even if you don’t plan to sell the property any time soon, registering the tank now can prevent added costs prior to and during a future sale.

I have a tank that was decommissioned years ago, but never registered with the DEQ, how do I now get it registered?

In order to establish if the tank has been decommissioned properly, soil samples and a tank inspection would be required. Soil samples need to be taken in order to determine if the tank had leaked prior to decommissioning. A tank inspection is necessary to establish if the tank has been decommissioned properly.

If the soil samples are clean and the tank has been decommissioned properly, the tank then can be registered with the DEQ.

USTs that have been Decommissioned inproperly

What happens if it isn’t decommissioned properly?

There could be a couple of different reasons a tank has not been decommissioned properly.  There may be inadequate or contaminated fill material, water within the tank or simply something that shouldn’t be in the tank (i.e. paint cans, large rocks, etc.).  Besides what is inside the tank, the soil samples will need to be taken into consideration to allow the tank to be certified as decommissioned to register with the DEQ.

  • Fill Material:  If the fill material within the tank is not an approved by the DEQ, that material will need to be removed and the tank will be re-decommissioned to DEQ standards for certification.  The same reasoning will go with contaminated fill material, even if it is DEQ approved material.  The contaminated material will need to be removed and the tank will need to be re-decommissioned to DEQ standards for certification.
  • Water:  If there is water within the tank, all water will be pumped out of the tank and re-decommissioned in order to certify with the DEQ.
  • Unconventional Items:  From time to time, items are found within a tank that should NOT be there.  Items such as large boulders, paint cans, trash cans and even tires have been discovered within a tank.  If this situation does arise, all items will need to be removed and disposed of in a landfill and the tank will need to be decommissioned.
Underground Storage Tank or UST Decommissioning

Underground Storage Tank or UST Decommissioning – Concrete, pain cans and water found within a tank.

What exactly do you do to decommission a tank?

In order to decommission an underground storage tank, we need to follow some step-by-step processes to ensure that we are able to take soil samples and inspect the tank properly.  This is the process by which EcoTech begins each in-place underground storage tank decommissioning project:

1.  We dig down, expose the tank and cut it open.

Underground Storage Tank or UST Decommissioning

Underground Storage Tank or UST Decommissioning – Exposed tank top.

2.  All tank contents are removed; heating oil, residual liquids, sludge.

3.  Clean and dry the tank interior and inspect it for holes.

Underground Storage Tank or UST Decommissioning

Underground Storage Tank or UST Decommissioning – Holes from within a tank.

4.  Collect soil samples from the inside and through the bottom of the tank.

Underground Storage Tank or UST Decommissioning

Underground Storage Tank or UST Decommissioning – The technicians cut two holes in the bottom of the tank to expose the soil underneath, two samples are then “grabbed” underneath the tank bottom.

5.  Soil Samples are submitted to the lab the same day for analysis, with results typically back the next business day by noon.

6.  Pending favorable laboratory results (less than 50 PPM), the tank can be backfilled with perlite or slurry.

***If soil sample results come in above the 50 PPM, remediation would be required to bring the site up to DEQ requirements.  (Please see our Heating Oil Contaminated Soil Clean-Up section for additional information on remediation Clean-Up with Decommissioning).

Underground Storage Tank or UST Decommissioning

Underground Storage Tank or UST Decommissioning – Tank filled with slurry.

7.  After the tank has been filled, the tank is then covered back over with the previous landscape (i.e. grass, concrete, dirt, etc.).

Radon Common Questions

Radon Common Questions

What is Radon?

Radon is a radioactive, colorless, odorless, tasteless, and naturally occurring gas. Radon is produced by the radioactive decay of radium, which is found in numerous forms of soils and rocks, especially granite.

Why is Radon harmful?

When inhaled, the radioactive radon particles can damage the cells that line the lungs.

Where is Radon found?

Radon is present in nearly all air, usually at very low levels, and has been identified in all 50 states.

How does Radon enter buildings?

Radon gas enters a building directly from the soil, through the lowest level in the building that is in contact with the ground. Typical entry points of radon are cracks in solid foundations, construction joints, cracks in walls and gaps in suspended floors.

Radon Common Questions

Radon Common Questions – Different ways radon can enter a home.

Can’t I just open my windows to get rid of the Radon?

Yes, this would help eliminate the radon levels in your home. Yet, when opening all of the windows in your home to eliminate the radon level, you would then be opening yourself up to sky high energy costs with the loss of conditioned or heated air.

Radon Measurement Questions

How do I find out if I have Radon in my home?

The only way to determine radon levels in your home is to conduct a radon test.  For more information on radon testing, please see our Radon Measurement Common Questions page.

What if I’m in a real estate transaction?

If you are purchasing a home, most buyers and their agents, test the new home as part of the inspection period. A Certified Radon Measurement Professional should be hired to conduct the radon test. The third party tester will perform a two day test, the test will be placed in the lowest portion of the home (i.e. crawlspace or basement) and will be required to be under “closed-house conditions”.

What Radon level should I be concerned about?

The EPA recommends that action be taken to reduce radon levels of 4.0 pCi/L or higher, and to consider lowering the radon to a level between 2.0 – 4.0 pCi/L. The EPA also recommends that you test your home every two years using a short-term or long-term test, to monitor radon levels.

Why does the EPA recommend 4.0 pCi/L and the World Health Organization recommends 2.7 pCi/L?

The EPA does recommend that homeowners should consider taking corrective action if their homes reflect radon levels between 2.0 and 4.0 pCi/L, since there is no safe level of radon exposure.  Radon measurement companies that have been certified are required to follow the EPA protocols, not the World Health Organizations.  Also, those companies that have been certified are mandated to observe all EPA protocols, if a company follows the WHO recommendations, they are in violation of their radon certification.

Removing radon from homes

How do I get rid of Radon from my home?

The method of reducing homes with high radon levels is through a process called Radon Mitigation. The most common and cost-effective mitigation system installed is called an active soil depressurization (ASD). The ASD system intercepts the radon before it enters the home from the soil and re-routes it into the atmosphere. An ASD system incorporates a suction pipe and an inline fan, creating a vacuum beneath the lowest level of the structure, intercepting and rerouting the Radon gases out of the home.  For more information on mitigation systems, please see our Radon Mitigation System Information page.

Radon Common Questions

Can’t I just seal cracks and other openings in and around the foundation to stop the radon from getting in?

The EPA does not recommend the use of sealing alone to limit radon gases. Sealing alone has not demonstrated to lower radon levels significantly or consistently.

Is there anything specific I should be worried about when it comes to mitigation systems?

Yes, not all radon mitigation systems are created equal. Below are just a few reasons it is important to do your homework when installing a mitigation system.

  • The system that is installed does not address the whole house. It is important to think of where the fan will be placed, is it under a bedroom window, will there be a noise issue effecting everyday life.
  • Poorly constructed systems can increase utility bills by hundreds of dollars a year, with the release of air conditioned or heated air.
  • Back-drafting of combustion appliances and fireplaces can kill occupants of the home.
  • Not using licensed electricians for installation or pulling proper permits with the city.

Radon Common Questions

I’m going to be converting my basement into livable space, should I test before hand?

Yes, a radon test should be done before starting construction and after the project has been completed. Generally, it is less expensive to install a radon mitigation system before or during renovations rather than afterwards.

I’m going to be sealing my home for energy efficiency, will that effect radon levels?

It can. Insulating and air sealing your home will reduce your carbon emission, save you money and energy. While achieving energy efficiency, you can also create an increase in radon due to a reduction in outdoor air entering the house. A radon test should be conducted before and after the weatherization improvements to ensure the home is safe from high levels of radon.

Both houses next to me have very little radon levels, doesn’t that mean mine does too?

Not necessarily. Radon levels can vary from home to home and cannot be based on someone else’s test. Homes which are next to each other can have different indoor radon levels. Nearly 1 out of every 15 homes in the US is estimated to have elevated radon levels. The only way to find out your radon level is to test your home yourself.

Radon Common Questions

Radon Mitigation Systems

Radon Mitigation Systems Questions

 

While addressing Radon Mitigation Systems, we have included a few common questions, along with a brief overview of the EPAs very informative Consumer’s Guide To Radon Reduction How to fix your home.   The link for the EPAs Consumer Guide is also included for you, for more of an in-depth read. EPA Consumer’s Guide To Radon Reduction How to fix your home.

I have high radon, can’t I take care of the problem myself?

The EPA recommends hiring a qualified radon mitigation contractor to lower the radon levels. Lowering radon levels requires specific technical knowledge and special skills. Without the proper equipment and technical knowledge, you could actually increase your radon levels or create other potential hazards and additional costs. If you still would like to complete the work yourself, contact Oregon Public Health for training.  Oregon Public Heath Radon Training Information

How can I find a contractor?

The EPA recommends using a certified radon mitigation contractor trained to fix radon issues. To find a licensed mitigation company in Oregon, click on the Oregon Public Health to find a list of licensed contractors. Oregon Public Heath Mitigation Licensed Contractors

What is a good way to determine a good contractor?

Do your homework and get multiple estimates and references. The EPA has an Evaluating and Comparing Contractors checklist that you can follow to evaluate and compare contractors.

Once you have compared and contrasted each proposal, the EPA suggests that you take into account what you will be getting for your money; a less expensive system may cost more to operate and maintain; a less expensive system may have less aesthetic appeal; a more expensive system may be best for your home; and, the quality of the building material will affect how long the system lasts.

The EPA also suggests that homeowners review each of the Contractors Proposals and Estimates.

Once you have decided on a contractor, the EPA suggests checking the Contractors Contract Language before any work starts.  The contract should match the original proposal, describe the exact work that will be completed prior and during the installation of the system, what the system consists of and how the system may operate. Many contractors provide a guarantee that the system will reach a negotiated radon level of 4.0 pCi/L or less.

What are the types of radon reduction techniques?

Contractors will analyze the following factors in selecting a radon mitigation systems for your home; how high the initial radon level is, the cost of installation and system operation, home size, and foundation type.

If your home has a basement or is Slab-on-Grade (concrete poured at ground level): In these homes, radon is usually reduced by Active Soil Depressurization System (ASD), this is the most common and usually the most reliable radon reduction method. This system creates a vacuum under the house to intercept radon before it enters the home. This is accomplished by inserting a suction pipe through the floor slab and into the soil underneath. A vent fan is connected to the suction pipe and draws the radon gas from below the home, the gas is then drawn up and dispersed to a discharge pipe and then vented above the home and into the outside air.

Radon Mitigation Systems

Radon Mitigation Systems – Interior Sub-Slab System

Radon Mitigation Systems

Radon Mitigation Systems – Two interior Sub-Slab systems.

 

Radon Mitigation Systems

Radon Mitigation Systems – Exterior Sub-Slab System

Radon Mitigation Systems

Radon Mitigation Systems – Installed Exterior Sub-Slab Mitigation System. The radon is vented above the roof line and the system has been designed to incorporate aesthetic features that correspond with the house.

If your home has a crawlspace: In these homes, the most effective method to reduce radon levels is through a sub-membrane suction. The sub-membrane involves covering the crawlspace floor (usually dirt) with a high-density plastic sheet. A vent pipe and fan are used to draw the radon from under the sheet and vent it to the outdoors.

Radon Mitigation Systems

Radon Mitigation Systems – Sub-Membrane System

Photos below show the installation of a Sub-Membrane Radon Mitigation System 

Radon Mitigation Systems

Radon Mitigation Systems – Technician coring hole for the piping to feed through the crawlspace to the exterior of the home.

Radon Mitigation Systems

Radon Mitigation Systems – Interior shot from the crawlspace, where the hole for the radon piping will fee through. The black sheeting is a pre-existing vapor barrier.

Radon Mitigation Systems

Radon Mitigation Systems – High density sheeting covering the crawlspace floor.

Radon Mitigation Systems

Radon Mitigation Systems – Interior view of the crawlspace, vent pipe and fan are used to draw the radon from underneath the high density sheeting and vent the radon gas to the outside.

Radon Mitigation Systems

Radon Mitigation Systems – Sub membrane sheeting with 4 inch pipe going to exterior of home.

 

Additional approaches to radon reduction: Besides the installation of a mitigation system, sealing cracks and other openings in the foundation will limit the flow of radon into your home. The EPA does not recommend the use of sealing along, as sealing by itself, has not been shown to lower radon levels significantly or consistently.

Checking the Contractors Work

The EPA recommends that you Check the Contractors Work with a list of basic installation requirements that should be met for the radon reduction system in your home.

Maintaining and Living with a Radon Mitigation System

Occasional maintenance may be required with the radon mitigation system. If you have a fan powered system, you will need to monitor the warning device, to make sure the system is working correctly. Fans may last for five years or more, and then may need to be repaired or replaced. On average, manufacturer warranties for the fans do not exceed five years, so the cost to replace the fan varies based on labor and materials. It is also recommended that the home is retested every two years to ensure that the system is working properly and the radon levels remain low. The fan must run continuously for the system to work correctly, do not shut it off.